CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY (for Automatic Air Conditioning System)
Disconnect the G81 air conditioning amplifier assembly connector.
Measure the voltage and resistance according to the value(s) in the table below.
Measure the values on the wire harness side with the connector disconnected.
| Tester Connection | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| G81-1 (IG+) - G81-14 (GND) | GR - W-B | Power source (IG) | Ignition switch ON | 11 to 14 V |
| G81-1 (IG+) - G81-14 (GND) | GR - W-B | Power source (IG) | Ignition switch off | Below 1 V |
| G81-21 (B) - G81-14 (GND) | GR - W-B | Power source (+B) | Always | 11 to 14 V |
| G81-14 (GND) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
Reconnect the G81 air conditioning amplifier assembly connector.
Measure the voltage and check for pulses according to the value(s) in the table below.
| Tester Connection | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| G81-38 (RDFG) - G81-14 (GND) | B - W-B | Rear defogger signal | Ignition switch ON, rear defogger switch off | 11 to 14 V |
| G81-38 (RDFG) - G81-14 (GND) | B - W-B | Rear defogger signal | Ignition switch ON, rear defogger switch on | Below 1 V |
| G81-37 (LIN1) - G81-14 (GND) | B - W-B | LIN communication line | Ignition switch ON | Pulse generation |